Development of a triple channel detection probe for hydrogen peroxide

The rapid and reliable measurement of hydrogen peroxide (H₂O₂) is imperative for many areas of technology, including pharmaceutical, clinical, food industry and environmental applications. In this work, a novel multifunctional complex, [Ru(bpy)₂(luminol-bpy)](PF₆)₂ (bpy: 2,20'-bipyridine), was designed and synthesized by incorporating a Ru(II) complex with a luminal group. In the presence of horseradish peroxidase (HRP), reaction of [Ru(bpy)₂(luminol-bpy)]²⁺ with H₂O₂ can be monitored by three sensing channels including photoluminescence (PL), chemiluminiscence (CL) and eletrochemiluminiscence (ECL). The quantitative assays for H₂O₂ in aqueous solutions using [Ru(bpy)₂(Luminalbpy)]( PF₆)₂ as a probe were established with PL, ECL and CL signal output modes, respectively.     

BioLeT: A new design strategy for functional bioluminogenic probes

By integrating photoinduced electron transfer (PET) into the design of functional bioluminogenic probes, Urano and his coworkers recently developed a new rational design strategy, BioLeT. It is expected that this BioLeT strategy will enable us to design and develop new bioluminescence probes for detecting various biomolecules with no catalytic or reactive activity.     

Copper as a Robust and Transparent Electrocatalyst for Water Oxidation

Copper metal is in theory a viable oxidative electrocatalyst based on surface oxidation to Cu^III and/or Cu^IV, but its use in water oxidation has been impeded by anodic corrosion. The in situ formation of an efficient interfacial oxygen‐evolving Cu catalyst from Cu^II in concentrated carbonate solutions is presented. The catalyst necessitates use of dissolved Cu^II and accesses the higher oxidation states prior to decompostion to form an active surface film, which is limited by solution conditions. This observation and restriction led to the exploration of ways to use surface‐protected Cu metal as a robust electrocatalyst for water oxidation. Formation of a compact film of CuO on Cu surface prevents anodic corrosion and results in sustained catalytic water oxidation. The Cu/CuO surface stabilization was also applied to Cu nanowire films, which are transparent and flexible electrocatalysts for water oxidation and are an attractive alternative to ITO‐supported catalysts for photoelectrochemical applications.     

A Highly cis‐Selective and Enantioselective Metal‐Free Hydrogenation of 2,3‐Disubstituted Quinoxalines

A wide range of 2,3‐disubstituted quinoxalines have been successfully hydrogenated with H₂ using borane catalysts to produce the desired tetrahydroquinoxalines in 80–99 % yields with excellent cis selectivity. Significantly, the asymmetric reaction employing chiral borane catalysts generated by the in situ hydroboration of chiral dienes with HB(C₆F₅)₂ under mild reaction conditions has also been achieved with up to 96 % ee, and represents the first catalytic asymmetric system to furnish optically active cis‐2,3‐disubstituted 1,2,3,4‐tetrahydroquinoxalines.     

Direct Conversion of Bulk Metals to Size‐Tailored,Monodisperse Spherical Non‐Coinage‐Metal Nanocrystals

Monodisperse non‐noble metal nanocrystals (NCs) that are highly uniform in shapes and particle size are much desired in various advanced applications, and are commonly prepared by either thermal decomposition or reduction, where reactive organometallic precursors or/and strong reducing agents are mandatory; however, these are usually toxic, costly, or suffer a lack of availability. Bulk Group 12 metals can now be converted into ligand‐protected, highly crystalline, monodisperse spherical metal NCs with precisely controlled sizes without using any precursors and reducers. The method is based on low‐power NIR‐laser‐induced size‐selective layer‐by‐layer surface vaporization. The monodisperse Cd NCs show pronounced deep‐UV (DUV) localized surface plasmon resonance making them highly competitive DUV‐plasmonic materials. This approach will promote appreciably the emergence of a wide range of monodisperse technically important non‐coinage metal NCs with compelling functionalities.     

Direct Insight into the Three‐Dimensional Internal Morphology of Solid–Liquid–Vapor Interfaces at Microscale

Solid–liquid–vapor interfaces dominated by the three‐phase contact line, usually performing as the active center in reactions, are important in biological and industrial processes. In this contribution, we provide direct three‐dimensional (3D) experimental evidence for the inside morphology of interfaces with either Cassie or Wenzel states at micron level using X‐ray micro‐computed tomography, which allows us to accurately “see inside” the morphological structures and quantitatively visualize their internal 3D fine structures and phases in intact samples. Furthermore, the in‐depth measurements revealed that the liquid randomly and partly located on the top of protrusions on the natural and artificial superhydrophobic surfaces in Cassie regime, resulting from thermodynamically optimal minimization of the surface energy. These new findings are useful for the optimization of classical wetting theories and models, which should promote the surface scientific and technological developments.     

Flame-retardant Wrapped Ramie Fibers towards Suppressing “Candlewick Effect” of Polypropylene/Ramie Fiber Composites

In this work, a flame-retardant polypropylene(PP)/ramie fiber(RF) composite was prepared. The ramie fibers were wrapped chemically by a phosphorus- and nitrogen-containing flame retardant(FR) produced via in situ condensation reaction so as to suppress their candlewick effect. Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy(SEM) demonstrated that the ramie fibers wrapped chemically by FR(FR-RF) were obtained successfully. Thermogravimatric test showed that the PP/FR-RF composite had more residue and better thermal stability at high temperatures than the PP/RF composite. Cone calorimeter(CC) results indicated that the peak of heat release rate(PHRR) and total heat release(THR) correspondingly decreased by 23.4% and 12.5% compared with the values of neat PP/RF. The PP/FR-RF composite created a continuous and compact char layer after the combustion. Combining FTIR analysis of char residue after CC test with heat conduction coefficient results, it could be concluded that the charring of FR on RF greatly weakened the candlewick effect of RF, and more char residue in the RF domain facilitated the formation of more continuous and compact char layer in the whole combustion zone, consequently protected PP composites during combustion, resulting in the better flame retardancy of PP/FR-RF composite than that of PP/RF composite.     

Formation of a vanillic Mannich base — theoretical study

One-pot anti-Mannich reaction of vanillin, aniline and cyclohexanone was successfully catalyzed by ionic liquid triethanolammonium chloroacetate, at room temperature. Yield of the obtained Mannich base was very good and excellent diastereoselectivity was achieved. Mechanism of the reaction was investigated using the density functional theory. The reaction started with a nucleophilic attack of aniline nitrogen at the carbonyl group of vanillin. The intermediate α-amino alcohol formed in this way was further subjected to protonation by the triethanolammonium ion yielding the imminium ion. Theoretically, the obtained imminium ion and the enol form of cyclohexanone can build the protonated Mannich base via the anti and syn pathways. The chloroacetic anion spontaneously abstracts the proton yielding the final product of the reaction anti 2-[1-(N-phenylamino)-1-(4-hydroxy-3-methoxyphenyl)]methylcyclohexanone (MB-H). The syn pathway requires lower activation energy but the anti pathway yields a thermodynamically more stable product, which implies that the examined Mannich reaction is thermodynamically controlled.     

Thermo-sensitive poly(DEGMMA-co-MEA) microgels: Synthesis,characterization and interfacial interaction with adsorbed protein layer

The novel microgels, poly[di(ethylene glycol) methyl ether methacrylate-co-2-methoxyethyl acrylate] poly(DEGMMA-co-MEA) microgels, were synthesized. The poly(DEGMMA-co-MEA) microgels were thermo-sensitive and exhibited a volume phase transitive temperature(VPTT) of 14–22 ?C. The incorporation of hydrophobic comonomer MEA shifted the VPTT of poly(DEGMMA-co-MEA) microgels to lower temperatures. The interfacial interaction of poly(DEGMMA-co-MEA) microgels and three model proteins, namely fibrinogen, bovine serum albumin and lysozyme, was investigated by quartz crystal microbalance(QCM). An injection sequence of "microgel-after-protein" was then established for the real-time study of the interaction of proteins and the microgels at their swollen and collapsed states by using QCM technique. The results indicated that the interfacial interaction of poly(DEGMMA-co-MEA) microgels and adsorbed protein layers was mainly determined by the electrostatic interaction. Because poly(DEGMMA-co-MEA) microgels were negatively charged in Tris-HCl buffer solution(p H = 7.4), the microgels did not adsorb on negatively charged fibrinogen and bovine serum albumin layers but strongly adsorbed on positively charged lysozyme layer. Stronger interaction between lysozyme and the microgels at collapsed state(i.e. at 37 ?C) was observed. Furthermore, the incorporation of MEA might weaken the interaction between poly(DEGMMA-co-MEA) microgels and proteins.